Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
Dismiss Notice

Recent Activity

Activity stream for all registered members at ECJ5.

JWillys58 liked Rozcoking23's post in the thread Dauntless Broken Carb Bolts.

I used ARB bolt kit....
Apr 19, 2024 at 1:50 PM
jeepljeff replied to the thread M38a1 24v To 12v; Delco Dual Pulley?.

There's some grease smears on it! At least the hi-torque Land Cruiser starter will distract people attention... Or the solid state...
Apr 19, 2024 at 1:44 PM
53A1 liked jeepdaddy2000's post in the thread Fan Blade Question.

A couple of things. First verify your temps with an IR gauge. I run a 5 blade stock Ford 3/4 ton flex fan with a home built shroud and,...
Apr 19, 2024 at 1:40 PM
53A1 replied to the thread Fan Blade Question.

This brings back nightmares. For a couple years I fought with overheating just as you describe. My solution was to move the trans cooler...
Apr 19, 2024 at 1:39 PM
Glenn liked Kaiser Jeep Guy's post in the thread 1963 Cj5.

Thanks, and agreed; oddly enough, the new tires are smaller/narrower than the ones that came off of it. I think the back spacing on the...
Apr 19, 2024 at 1:25 PM
Glenn liked jeepdaddy2000's post in the thread 1963 Cj5.

You may want to mount the front tires and spin the steering wheel from lock to lock. I have a feeling they are going to foul the springs...
Apr 19, 2024 at 1:25 PM
Glenn liked Kaiser Jeep Guy's post in the thread 1963 Cj5.

I put together some spare parts and got some 285/75r16’s ready to go: [ATTACH] These are factory 16” Jeep j200 or j300 FSJ Gladiator...
Apr 19, 2024 at 1:24 PM