With my comments above, I base that on my own experience. D25 power lok with manual saginaw steering and 2 hole knuckle with one piece tie rod...
Remember that stupid repli tub ad in the magazines that pictured a gent holding a crescent wrench in front of the repli tub and saying how easy it...
With any type of traction device installed in the front axle, it's my belief that installing the two hole knuckle on the passenger side (D25,D27)...
I also used the cast fork but cut it down and rewelded/brazed for the same length as stock fork when I did the SM420 conversion. Works fine. I...
I saw the 2 bolts at the top but was trying to see the flat in the housing at the top as well. But the rust camo keeps me from seeing that feature...
Nice cage. Twin tanks. More pics would be helpful. Could be a good Jeep.
Then they would have to pay and re-train workers. Might cost .50 an hour more in wages.
They could learn something from Henry Ford. Not to impressed by what I see.
That true, can't argue that. So with decades of examples out there to look at, this was his remedy to his situation. YMMV
Typical "I have this engine, what can I put it in ?". Just because you can doesn't mean you should. Front grille extension looks terrible.
I seem to recall that the mid 70's water pumps had some issues with depth and/or accessories not bolting up correctly. Some of the new factory...
I like the truck. Nice to see one with a decent interior for a change. Something funky about the fuel filler neck/gas cap. Not the original...
Since the original fuel return line is still connected to the front tank, you have a couple options: 1 Cap off the fuel return and do not use. 2...
Separate names with a comma.