1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Starting With The Battery...

Discussion in 'Early CJ5 and CJ6 Tech' started by Ray Hogan, Aug 2, 2019.

  1. Aug 3, 2019
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    I shy away from any that don't have them for my jeep and truck, but then again you guys mentioned that most batteries nowadays don't last more than 5 years, most all of my batteries have lasted 8-12 years. Even my motorcycle batteries have caps, i just replaced it 2 months ago and it was new in 2008, my riding lawnmower battery is more than 10 years old now.:shrug:
     
  2. Aug 3, 2019
    Ray Hogan

    Ray Hogan Member

    Joined:
    Nov 29, 2015
    Messages:
    85
    D9159409-4C81-4B40-8D62-0106E3B76AA6.jpeg Ok, I’m home from work, here’s what my current situation looks like...battery is physically too small, only 9” wide, and the terminal posts are on the engine side of the battery top.
     
  3. Aug 3, 2019
    Ray Hogan

    Ray Hogan Member

    Joined:
    Nov 29, 2015
    Messages:
    85
    98A919F6-908D-4650-BC6E-F7D8EEF0E08D.jpeg Here is the original battery top holder
     
  4. Aug 3, 2019
    Ray Hogan

    Ray Hogan Member

    Joined:
    Nov 29, 2015
    Messages:
    85
    78D73592-8D93-4302-8ED0-53F02B23B688.jpeg The battery top holder needs to be oriented just like I have it on the fender because the “J bolt” holes are offset toward the engine.
     
  5. Aug 3, 2019
    Ray Hogan

    Ray Hogan Member

    Joined:
    Nov 29, 2015
    Messages:
    85
    So, I believe I need the group 24 configured battery... it’s 10” wide “, which will physically fit the tray and the top holder, the posts are on the fender side of the battery top, and the positive terminal is on the firewall end of the battery...that’s my story and I’m sticking with it, at least for the moment, ha, man I have a headache!
     
  6. Aug 3, 2019
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    Are you still pondering which battery to buy? I guess you answered my question.
     
  7. Aug 3, 2019
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    Group 24 is certainly the correct size. :)
     
  8. Aug 3, 2019
    Ray Hogan

    Ray Hogan Member

    Joined:
    Nov 29, 2015
    Messages:
    85
    31DB41E9-10DC-4083-9A55-96763A560F33.png Oh, and it has to be turned 180 degrees so that the label is on the engine side, I think, ha
     
  9. Aug 3, 2019
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    Yep, do it that way and it will fit good and the terminals will be easily accessible.
     
  10. Aug 3, 2019
    Ray Hogan

    Ray Hogan Member

    Joined:
    Nov 29, 2015
    Messages:
    85
  11. Aug 3, 2019
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    If you are thinking of getting the 24F make sure you're satisfied with the position of the terminals. I like them on the fender side of the battery.
     
  12. Aug 3, 2019
    Ray Hogan

    Ray Hogan Member

    Joined:
    Nov 29, 2015
    Messages:
    85
    Right...the 24F won’t work with the original top holder because I need the terminals on the fender side. You are correct!
     
  13. Aug 3, 2019
    Ray Hogan

    Ray Hogan Member

    Joined:
    Nov 29, 2015
    Messages:
    85
    Moving on to the motorcycle carrier in my next thread, ha.
     
    Glenn likes this.
  14. Aug 3, 2019
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    For confirmation the FSM schematic shows the terminals on the fender side.
     
  15. Aug 3, 2019
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,375
    Now that sounds interesting. :)
     
  16. Aug 3, 2019
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,118
    Basically an AC ohmeter, or since they actually measure "conductance" a "mho" meter.

    To each his own but a hydrometer really only tells you the specific gravity of the electrolyte, it's possible to have a good electrolyte SG (or state of charge) but the battery is shot. Either the unit's I mentioned or a measured load test will indicate what the battery's true capabilities are.
     
  17. Aug 3, 2019
    Ray Hogan

    Ray Hogan Member

    Joined:
    Nov 29, 2015
    Messages:
    85
    Keep in mind that I need the positive terminal on the firewall side and the terminals on the fender side, so the 24 battery turned 180 degrees in the tray, I think, right?
     
    Glenn likes this.
  18. Aug 3, 2019
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,118
  19. Aug 3, 2019
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,805
    Be interesting to estimate the cost of electricity for the maintainer, over 19 years, compared to a new battery.
     
    Hellion likes this.
  20. Aug 3, 2019
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,805
    I have about five, all in 6-volt vehicles.

    And the 12-volt "maintainance-free" unitary caps will pry off.
     
New Posts