1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Rozcoking23's Recent Activity

  1. Rozcoking23 liked Fresbone's post in the thread 67 Cj5 Build Thread By A Rookie.

    So the paint over the bedliner didn’t work. It is still tacky after about 3 weeks. I think the solution is going to be mostly mechanical...

    IMG_2088.jpeg IMG_2089.jpeg IMG_2087.jpeg IMG_2090.jpeg IMG_2086.jpeg Apr 19, 2024 at 12:20 AM

  2. Rozcoking23 liked FinoCJ's post in the thread Fino's 58 Wagon.

    The adjusters were way out of adjustment....don't know if it was me when i put them on, or if the mechanism is not self adjusting...

    Apr 18, 2024 at 11:04 PM

  3. Rozcoking23 liked Buildflycrash's post in the thread 1966 (why Did I Buy This?) Jeep..

    Stripped down the driver side tub. [img] Weld thru primer on the repair sections. Regular rattle can primer on the sheet metal. [img]

    Apr 18, 2024 at 10:59 PM

  4. Rozcoking23 liked wheelie's post in the thread Hoist The Jib.

    Yea. But all you see is getting replaced soooooo........

    Apr 18, 2024 at 10:59 PM

  5. Rozcoking23 attached a file to the thread Fan Blade Question.

    Today was 81* out. Ran down freeway Between 60-70 mph temp was at 190* [ATTACH] pulled off the freeway and stopped at bottom of off...

    IMG_3402.jpg IMG_3403.jpg Apr 18, 2024 at 10:49 PM

  6. Rozcoking23 replied to the thread Fan Blade Question.

    John, I have always wondered how much that shroud is doing with the bottom open. I went to the parts store today and picked up items...

    Apr 18, 2024 at 10:41 PM

  7. Rozcoking23 liked duffer's post in the thread Fan Blade Question.

    The fan and shroud are clearly the most important items here. If you have a well fit shroud that doesn't allow air leaks between it and...

    Apr 18, 2024 at 10:37 PM

  8. Rozcoking23 replied to the thread Fan Blade Question.

    Thank you.

    Apr 18, 2024 at 10:36 PM

  9. Rozcoking23 liked Jw60's post in the thread Fan Blade Question.

    Don't put the thermostat directly into the boiling water, heat the thermostat and watch the temp at which it opens. You don't want to...

    Apr 18, 2024 at 10:36 PM

  10. Rozcoking23 replied to the thread Fan Blade Question.

    I was reading this thread and bought #J5357390. It will need the holes slotted about 1/8”....

    Apr 18, 2024 at 10:36 PM

  11. Rozcoking23 liked supertrooper's post in the thread Fan Blade Question.

    "It runs@ 180*-185* running down the road in 100* weather. Once I slow down for in town driving it will kick up to 190*-200*, all...

    Apr 18, 2024 at 10:34 PM

  12. Rozcoking23 liked Fireball's post in the thread Picked Up A Traitor Jeep (tj).

    bunch of TJ Moab action shots thanks to James and Jen: [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]...

    Apr 18, 2024 at 10:51 AM

  13. Rozcoking23 replied to the thread Hoist The Jib.

    Heck, that’s just a case of beer from being done, it’s already a roller.

    Apr 18, 2024 at 10:43 AM
Show older items
New Posts