When I bought my CJ5 about 2 years ago it had 4 really old and very cracked Dick Cepek bias plys on it. They had good tread left and I had other...
That might get you home in a pinch, but I sure wouldn't leave it like that. Bound to cause a misfire eventually.
Yeah, probably made in China (but so was my wonderful jeep loving wife!) but you can replace your 258 t-housing with that from a 4.0 and it has a...
I have one like that in a 258. Love it. Get the one that comes with the wires.
Sounds to me like priming may not be the issue, possibly just not building pressure. First thing I would check would be the pressure relief valve....
You realize that 2010 was over 3 years ago, right? Oh, nice jeep!
It almost sounds like the voltmeter is connected in place of the charge light, combined with poor grounds.
[IMG] I haven't actually tried to tow it with the Jeep yet, but plan to very soon. Start out just around the neighborhood to test it and if all...
You could eliminate binding as a possibility by jacking up one wheel and trying to shift it. If you have open differentials this will remove the...
You could try unlocking your hubs before shifting out of these ranges. Might make a difference.
I believe the low speed could be controlled by a resistor in series with the low speed terminal of the switch. Not sure of the ohm value, that...
That's a great day! My son is 14 and he gets so excited to drive whenever we go out to the desert. I get excited that he is interested in how it...
You know, you're right about that. I was thinking of times in the past installing distributors in engines where other parts may limit rotation of...
OK I just looked at the duraspark guts on google images. Once you have the rotor removed from the shaft you should see another rotor lower on the...
I am not sure of the pickup configuration of the duraspark/msd unit, but I static time hei all the time. The coil will fire when the reluctor tips...
Separate names with a comma.