Didn't they use to be on North Federal Blvd, on the east side of the street?
Kaiser Willys http://www.kaiserwillys.com/product/317/willys_exhaustsystems was where I bought my exhaust system two years ago, but I seem to...
So I looked at my 225 a couple days ago. It had the tube, but the dipstick was missing.:(
I'll take a look at home. I have a 225 sitting in my garage that some P.O. had left the oil pan off of for 3+ years. Some parts were missing too,...
Good to know! Thank you. When I tore down my Jeep, I never saw a spare hole in the dash, other than the hacked out radio hole next to the parking...
I cannot verify that my '65 Tux was originally a column shift or not. I did notice a pin at the top of the column that appears to have been a...
Don't mean to hijack here, I have contemplated swapping out my points for a Pertronix unit. I have used them in the past, and they are awesome,...
Hmmmm. I will have to take a look at that '63 wagoneer frame in the back yard and see what brakes are on it.
I used what had came in the parts kit box. Like duffer, I used a dbl. hole steering knuckle. I salvaged a '63 wagoneer rolling frame and used...
If it were up to me, I would run the 4.27's with the V6, (or 4.56's with overdrive) and a 33" tire. This would net me a comfortable highway speed...
I had found washer nozzles on some of the older/classic vehicles at my local salvage yards. If your junk yards haven't cleaned them out for the...
Line locks are a good idea until one of your wheel cylinders or brake lines develop a leak in the system. We had an old diesel forklift that used...
I like that idea! Too bad that I had already drilled into my diamond plate corner and mounted my light/bracket assy. I anticipated a swing away...
My Jeep is a '65 CJ5A. I am not sure of the differences in dimensions from knuckle to knuckle from a CJ2A to that of a CJ5A, but when I performed...
Separate names with a comma.
