I had the same problem and finally traced it to the fact that my underseat tank was for a four banger. I knew that when I installed it but...
Thanks for the advice. I am not considering the twin stick at this time, but I'll keep it in mind. My current program is to enhance the stock...
I did the Cape Conversions HEI last year. I recommend it. Installation was simple and performance greatly enhanced. I have to emphasize...
I need a longer shift lever for my D18 transfer case! If I could just install a lever similar to the transmission shifter, I would be a happy...
I've got the original radiator for the dauntless with the 180 thermostat and stock fan. However, I added an 1,800 cfm flexalite electric fan....
Thanks for the reference! That is just what I needed. Judging from their prices this won't hurt very much. JK PS to Rio: Good luck in...
While watching one of the gearhead shows on cable a week or two ago, I saw the slickest Ebrake kit for replacing the d18 drum brake. Trouble is,...
All is well with the new flaming river column and shaft and overall power steering upgrade. Except when I cut the Spartan unit out and started...
Update. I put a 4" length of 3/8" fuel/emissions hose on the vent. I will lower the float about 1/16" and give her a try. Thanks for the...
Any detectable negative effects from the spacers? My CJ rubs also, but I don't want to screw up the vintage looks! JK
Mine leaks no more. Just had it and the T86A rebuilt. wish the t86 was nice enough not to mark its territory. JK
Thanks Tim. That is a lot of information. I'm not familiar with the vents on the 2v, and the jet extensions are Greek to me. But, knowing...
Separate names with a comma.