Sorry I never updated this. Yes got it running. I had put on a new set of plug and coil wires on that I had only to find out that they were 12v...
Ok so now I am down to starting the Jeep. I replaced the wiring harness with Walck's cloth wrapped one. Looks sweet. Horn and lights work. Jeep...
Did that work out good? I am wanting to install my radiator and would like to get something in there that appears to be close to original.
The felt on the bottom was held on with a twisted tac hammered through the metal
Yeah, I probably filled it too much. I will get it bolted in and then fill it back up. Makes sense, I did not recall seeing anything that would...
Better than that canvas strip that Kaiser sells I would think.
Got another issue I have been working on. I rebuilt the Ross steering box. I filled it with oil and have not installed it yet because it seems to...
I found a classic auto site that sells 6v heater motors, I have not had a chance to get cage dimensions to see if it would fit housing. Not too...
Thank you. This Jeep belonged to my grandfather so the restoration and details have been a labor of love as well as a tribute to him.
Original colour was called something like "General Julip green" or something. I have the new paint code from the computer scan off the inside of...
[IMG] So when I replaced the front floor, it did not have the hump at the back edge. I made that piece for each side then took a "Canadian"...
[IMG] Theover lap is to protect from shoes entering Jeep [IMG] [IMG] I have to swap the 1 end around on the right [IMG] Powder coating the...
Yeah I do not have that floor panel done yet. I had coated both side of it with Rhino then realized that I could not get cage nuts to lineup with...
I replaced the front floors and "Hat Channels" underneath, the rear floors, both corners, the tail light valences and the tail gate valance. After...
I am working on a 1956 CJ5 Willys. It has been some time since I dismanteled the Jeep and need to know a few things. 1) Is there supposed to be a...
Separate names with a comma.
