Neither of the seats are hinged. The passenger seat has the pivots at the floor. I have someone that wants both. If this falls through, I will...
I used an old(antique) black ceramic door knob. Looks cool, stays on and doesn't crack like the old rubber one.
I removed the existing tube. The brake line was flared at the bottom where I attacked it to the steering box. I left the tube long enough to be...
I repaired mine with a section of steal brake line and jb weld. Been three years with no leaks.
This discussion has been had before and I'm sure if you search you can find it. What it boils down to is you don't need to do anything, your...
What is the ratio at the differentials?
The springs don't go on the clutch fork. They go to the thing in front of the throw out bearing.
I installed mine through the inspection hole.
I finally installed my Warn Overdrive. It seems to work alright, but I really have to jam it into overdrive to get it into gear. It shifts alright...
The two sizes are obvious. The smaller of the two are used with the counter shaft. Four rows of 22. I counted as I put them in.
My kit from Herm had extra.
Cluster gear out. I guess not bad for 50 years of abuse and neglect. [IMG] [IMG]
Ok I'm learning that you can't just follow one description of the process. I needed to remove the smaller of the two snap rings to drive the main...
Separate names with a comma.