1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by Douglas C Box

  1. Douglas C Box
    Thread

    Rear Pinion Seal Replacement

    I am getting ready to replace the rear axle pinion seal on my 1964 CJ5 What size is the nut that holds the yoke on. The jeep is out of...
    Thread by: Douglas C Box, Oct 16, 2009, 6 replies, in forum: Early CJ5 and CJ6 Tech
  2. Douglas C Box
    Post

    carb problem

    I have a friend with multiple old jeeps and swears by the Solex replacement carbs you can get new for about $125.00 You should hear those...
    Post by: Douglas C Box, Dec 5, 2006 in forum: Flat Fender Tech
  3. Douglas C Box
    Post

    3 speed or 4 speed

    My 64 has reverse on the right and forward. It has a factory T98 and F134 engine. I like it alot. Doug
    Post by: Douglas C Box, Dec 5, 2006 in forum: Early CJ5 and CJ6 Tech
  4. Douglas C Box
    Post

    Towing speed (w/driveshaft disconnected)

    I have an elderly friend who has pulled his CJ3B over 800 miles each way Elk hunting. He has don it for over 20 years and at whatever speed he...
    Post by: Douglas C Box, Nov 17, 2006 in forum: Early CJ5 and CJ6 Tech
  5. Douglas C Box
    Post

    M151 Clutch interchange F134?

    You have to watch those things on ebay when it comes to jeeps, parts etc etc. Either people dont know what is what or are trying to pull the wool...
    Post by: Douglas C Box, Nov 17, 2006 in forum: Early CJ5 and CJ6 Tech
  6. Douglas C Box
    Post

    What is a Full Float axle

    Yep, you guys are correct! Early MB military jeeps had the FF type rear axle and can easily be identified by the larger hub. Lots of...
    Post by: Douglas C Box, Nov 16, 2006 in forum: Early CJ5 and CJ6 Tech
  7. Douglas C Box
    Post

    What exactly do I have here? ::BIG pics::

    T90 and Model 18 are std Military 1 1/8" pin Doug
    Post by: Douglas C Box, Nov 7, 2006 in forum: Flat Fender Tech
  8. Douglas C Box
    Post

    greetings, Q about rims

    Offset is wrong also. It will make your wheel base to narrow. And, to narrow for those KO tires. Doug
    Post by: Douglas C Box, Nov 3, 2006 in forum: Early CJ5 and CJ6 Tech
  9. Douglas C Box
    Post

    4.88 gears

    If you want the best of both worlds in sand and on the road the only choice is the OD unit. Just bolt it on and go. Although they are scarce,...
    Post by: Douglas C Box, Oct 19, 2006 in forum: Early CJ5 and CJ6 Tech
  10. Douglas C Box
    Post

    alternative fuel on an F134

    Propane is your best bet. It has all allready been figured out. Longer engine life, cleaner exhaust, fuel never goes stale, no junk in fuel,...
    Post by: Douglas C Box, Oct 19, 2006 in forum: Early CJ5 and CJ6 Tech
  11. Douglas C Box
    Post

    M100 trailer bed pan replacement?

    Anybody got any pics or the rear of the M100 trailer? I need to know where the stars or star goes on the back end. some say one in each top...
    Post by: Douglas C Box, Oct 9, 2006 in forum: Jeep Trailer Tech
  12. Douglas C Box
    Post

    134 External Oil Lines

    I like the stock set up. Mine has been hanging in there since 1964.
    Post by: Douglas C Box, Oct 5, 2006 in forum: Early CJ5 and CJ6 Tech
  13. Douglas C Box
    Post

    I decided on a name for my Jeep

    Looks alot like my 1964 CJ5 I named mine Sue after the 76 year old lady I bought it from. She had it since 1987 Doug
    Post by: Douglas C Box, Oct 3, 2006 in forum: Early CJ5 and CJ6 Tech
  14. Douglas C Box
    Post

    WO Carburetor Adjustment???

    I found everything I need in a 1945 dated service manual I had in my shop. It tells every detail, orfice sizes, float level, etc etc. It even...
    Post by: Douglas C Box, Oct 3, 2006 in forum: Flat Fender Tech
New Posts