A couple days ago I switched out the Amsoil to StaLube GL4 as Herm has this listed. I’ve only put about 20 miles on so far. I’m curious to see if...
I’ve been running Amsoil 75w-90 in my entire drivetrain. 1956 CJ5 with OD, for 25 yrs without issue. I recently read about the GL4 classification...
Finally got it out tonight and I really drove the snot out of it. I cleared my neighborhood of mosquitos and maybe several other neighborhoods...
One other thing when working on brake lines whether new or just taking an old one apart for some reason: —put never-seize on the threads of...
I also cut a piece of hose about an inch long and plug one end with Permatex. Let the Permatex dry then slide that over the bleeder when you’re...
Did you get the Weber on yet? I’m considering trying one
My CJ has peanut allergies hence the pickle jar
This method has worked for me for 25 yrs: 1) Take each bleeder screw out and put lots of never-seize on the threads. 2) get a hose that fits right...
I use a JC Whitney 12 volt pump. Works great, pumps fast. Just buy more pliable hose because the stuff that comes with it is stiff. I used clear...
My dad has a set of these with the bits. The railroad was going throw them a way brand new so they didn’t have to move them to the new shop. They...
—I use same GM parts all around without any stopping issues but I’ve never had to emergency stop on the street. I have read somewhere about Suzuki...
—I also noticed I did not have the cone shaped baffle installed with my PCV. —I got a baffle with my downdraft tube and will use that when I...
—I’ve taken it apart and cleaned with carb cleaner. —The steel cone that rests inside the spring has a small hole in the top. That hole also has...
Is there supposed to be a baffle behind the “bell” that attaches to the side cover?
Separate names with a comma.