Thank you. still trying to learn all these tricks from you all.
How do you do this?
thank you. Mine is missing the bracket that attaches to the bell housing but that’s a simple thing to make.
Even a small win is a win!
I think I’m just going to go ahead and bite the bullet and drop the transmission and fix everything right rather than trying to take a short cut...
On a positive note, I found out why my backup lights don’t work :)
Thanks. I can barely move it all the way forward using two fingers.
I disconnected the clutch cable from the fork so I could move it forward and backward in order to get a feel for when it engaged the clutch...
first off, I can’t believe you saw the spring was missing! So thank you again for pointing that out. I found this spring in the box of parts...
That spring is missing as noted. Thanks for noticing that and for the reference link!!!
there is this spring attached to the clutch pedal [ATTACH] But no other spring that I can see (other than the one I took off of the brake...
Fireball is correct. I ran across it in his build thread. Which is very informative by the way. thanks again for everyone’s suggestions and...
Got the floorboards removed. Here’s what I’m seeing. The “wet” oil is from all the PB Blaster I started spraying on the bolts. [ATTACH]
Yeah my plan is to replace throw out bearing and the clutch/pressure plate. And whatever else turns up after I can get a look at it.
Separate names with a comma.
