Bumping the motor over to TDC before pulling the dizzy I had no play and then lots of play pointing to the gears, once pulled, both the cam gear...
With the dizzy pulled the drive gear on the cam is toast as well. So apart it all comes. Anyone have a part # for the cam side drive gear? I can...
Yes, it was shimmed and set up properly and pinned in place with the exception of the pressure relief springs, I had a job change and moved...
I recently had a dizzy gear failure while warming up several weeks ago. Didn’t think much of it as it was a used delco that I used for a...
That’s what I needed to know, I have picked up a good running, good vacuum, good oil pressure hot with no blow by 401 that didn’t come with a...
I’ve attempted to search and I can find new build info on the external balancing of the cranks and flywheels on 401 motors. My question is, will...
No, I have not found it as of yet, this may be a long process if I ever do find it.
Not sure if either system will allow for the 13 digit vin... I will have to try it and see.
Ok, I was digging through stacks and stacks of old paperwork of my fathers and came across a copy of the title to a 71 Renegade II that my folks...
I have the same Walack's harness in the orange RI and my plan is to copy the yellow one to add the needed wiring for both the AMP and OIL. I just...
Does anyone know what the factory ink/paint stamps were to indicate. I have 2 Baja yellow R2's and one has a "525" stamp on the radiator cowl and...
Separate names with a comma.