1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by 1974Sixer

  1. 1974Sixer
    Post

    Caster Question?

    Mike's shim wedges did the trick and she's driving allot better now. Thanks for all the help guys. Once I got the shims in and took it for a...
    Post by: 1974Sixer, May 22, 2017 in forum: Intermediate CJ-5/6/7/8
  2. 1974Sixer
    Post

    New Bds Springs

    I ordered and installed mine about a month ago and I noticed some leaf alignment issues but not that far out. Regardless they do feel and ride great.
    Post by: 1974Sixer, May 12, 2017 in forum: Intermediate CJ-5/6/7/8
  3. 1974Sixer
    Post

    Caster Question?

    That's my plan. Mike is shipping me shims tomorrow so next weekend I should have it back up at the alignment shop with the casters installed and...
    Post by: 1974Sixer, May 11, 2017 in forum: Intermediate CJ-5/6/7/8
  4. 1974Sixer
    Post

    Caster Question?

    One last question, when you guys added shims to BDS springs, did you have to order a new/longer center pin?
    Post by: 1974Sixer, May 9, 2017 in forum: Intermediate CJ-5/6/7/8
  5. 1974Sixer
    Post

    Caster Question?

    Is Mike and Mcruff the same person?
    Post by: 1974Sixer, May 8, 2017 in forum: Intermediate CJ-5/6/7/8
  6. 1974Sixer
    Post

    Caster Question?

    Thank you guys...I got it now. For some reason I thought I needed the top ball joint out ahead of the lower. ( I was literally thinking of a...
    Post by: 1974Sixer, May 8, 2017 in forum: Intermediate CJ-5/6/7/8
  7. 1974Sixer
    Post

    Caster Question?

    I'll take it back. Ok, just to make sure I've got this. It appears to me that the bottom ball joint is closer to the front of the jeep than the...
    Post by: 1974Sixer, May 8, 2017 in forum: Intermediate CJ-5/6/7/8
  8. 1974Sixer
    Post

    Caster Question?

    I have 31 inch radial tires on it that were recently balanced and rotated. Tim, I'm not sure why they set the toe there. I would if I should...
    Post by: 1974Sixer, May 7, 2017 in forum: Intermediate CJ-5/6/7/8
  9. 1974Sixer
    Thread

    Caster Question?

    [ATTACH] I need advice on what to do next. First off here's where I'm at, 1974 CJ 6. I just replaced the upper and lower ball joints, new wheel...
    Thread by: 1974Sixer, May 7, 2017, 25 replies, in forum: Intermediate CJ-5/6/7/8
  10. 1974Sixer
    Post

    Question About Troubleshooting Gauges

    Sorry for the hi jack but if I remove the bolts around the outer edge of my dash along with the steering shaft cover, will I have adequate access...
    Post by: 1974Sixer, Apr 20, 2017 in forum: Intermediate CJ-5/6/7/8
  11. 1974Sixer
    Post

    Tie Rod And Ends Sources

    I just ordered new moog tie rod ends and a drag link from rock auto. Three tie rod ends, a drag link and an adjusting sleeve shipped for $117.84
    Post by: 1974Sixer, Apr 19, 2017 in forum: Intermediate CJ-5/6/7/8
  12. 1974Sixer
    Post

    Ball Joint Question

    As far as mine, I used the new splint ring that came with my moog ball joint and couldn't get the 50 lbs of preload on the passenger side. I was...
    Post by: 1974Sixer, Apr 19, 2017 in forum: Intermediate CJ-5/6/7/8
  13. 1974Sixer
    Post

    Ball Joint Question

    It does appear that my new Moog ball joint may have a slightly thicker stud which is probably why they sent a new split ring with the new ball...
    Post by: 1974Sixer, Apr 14, 2017 in forum: Intermediate CJ-5/6/7/8
  14. 1974Sixer
    Post

    Ball Joint Question

    Here you go. what does split ring nut of ball joint do?? - JeepForum.com
    Post by: 1974Sixer, Apr 13, 2017 in forum: Intermediate CJ-5/6/7/8
New Posts