Wheel Adapter Question/Advice Needed

Hello,

The PO of my CDN M101 trailer converted the wheels to a 5" bolt pattern (new jeep). I would like to convert to the CJ 5 on 5.5" bolt pattern so I can just have the spare that is already attached tail of the jeep. Does anyone have a good source for these type of wheel adapters? Any recommendations?

Also, will I need 1" or 1.25" wheel spacers to make it all work? I am running 31" 10.50s.

Thank you!

 

Spdertrax are good, use them on the CJ, but it seems they do not make adapters. How about Summit Racing? Anybody use them?

Thank you!

 

i got some on ebay for the hotrod . i think 60 or 70 bucks.
patrick told me to make sure they were 6011? aluminum.
hopefully he will chime in because i cant remember

 

Is the 5.5" bolt pattern the standard for your trailer? If so I would consider just replacing the hubs back to original. Even better is find someone with a newer Jeep who is looking for the 5" and swap hubs.
I do plan to use spacers on the rear of ours so am not opposed to them.

 

this is what summit had 5x5 to 5x5.5 1.5" thick
http://www.summitracing.com/parts/RGG-1520107/
I had just checked on my order at 1am and it is waiting for ups or fedex
I had some parts back ordered last week so i just called after finding a part that would work in place and they added it with today's order, canceling the back ordered parts and now i have a credit, call took ~4min 31sec including hold time.
I'm a very happy Jeeper.

 

This is good info. The PO of my CDN M101 trailer said he adapted to a different bolt pattern, but I can't tell. He said it is a modern Jeep, but TJ's are running 5 on 4.5 and the trailer wheels measured out to 5 on 4.25 with a tape measure. Again, I may be off, the CDN M101 specs say it is a 5 on 112mm or 5 on 4.4, which is oddball. It looks like these will have to be custom made, but I want to be sure. Anyone out there with experience on this?

Thank you!

 

This is an NOS one I bought as a spare when I had a M416 trailer $35 plus shipping

Buy a set of these M416 wheel hubs:

 

Got it!

Spidertrax 5x4.5 to 5x5.5 adapter. The wheels are spaced out about 1" more than I'd like, but not too bad. I have attached a poor cellphone pic of the rig. Thanks for all your help!!