1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dauntless trouble update

Discussion in 'Early CJ5 and CJ6 Tech' started by Patrick, May 12, 2011.

Page 5 of 5
  1. May 29, 2011
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    The oil cap came from another Dauntless, I think. The breather came from Autozone. On that valve cover (with the bigger hole) I brazed a washer on it so it would accept a standard 1 1/4" grommet. The other side I punched out to the same with a chassis punch.
     
    Patrick, May 29, 2011
    #81
  2. May 30, 2011
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,503
    Good show old man, good show. Glad the problem is solved and that it was not a more serious issue.
     
    wheelie, May 30, 2011
    #82
  3. May 30, 2011
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    I do sleep better now that that's all over...:D Now I just gotta get some miles on it..70 so far..:D
     
    Patrick, May 30, 2011
    #83
  4. May 31, 2011
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    I put about 50 highway miles on it today.:D :D :D It seems to have a bit more power than the old one....A bit..;)
     
    Patrick, May 31, 2011
    #84
  5. May 31, 2011
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Quite an adventure - thanks for sharing. Glad that it turned out ok and that you are back on the road.
     
    timgr, May 31, 2011
    #85
  6. May 31, 2011
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    You know, it's a good thing that I generally enjoy working on the Jeep.
    FWIW, I emailed pics of the repair and a "repair order" to the rebuilder, and it's been submitted for reimbursement. The core gets picked up tomorrow...
     
    Patrick, May 31, 2011
    #86
  7. May 31, 2011
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,469
    Dare I ask who the builder was? I normally take mine down to a little old guy who knows these things inside and out for the machine work, but he is 91 now and I am not sure how long he will be with us.
     
    Warloch, May 31, 2011
    #87
  8. May 31, 2011
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    S&J engines in Spokane.

    FWIW, everything on this motor looks great. For whatever that's worth. Their website makes their operation look pretty impressive, too. FWIW
     
    Patrick, May 31, 2011
    #88
Page 5 of 5
New Posts