1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

62 Cj5. The Miami Project.

Discussion in 'Builds and Fabricators Forum' started by tripilio, Nov 6, 2018.

  1. Aug 14, 2021
    givemethewillys

    givemethewillys Been here since sparky ran it. 2022 Sponsor

    New Kent, VA
    Joined:
    Jun 21, 2005
    Messages:
    1,998
    I really like how accessible your fuse block is! Do you have a plan on how to waterproof it?

    I may have to modify my wiring harness (currently in progress) to have the fuse block in the same area.
     
    tripilio likes this.
  2. Aug 14, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Thanks! Hopefully with the hood down no water should get there. The fuse block has a cover, that should suffice if here is any little moisture.
     
  3. Aug 14, 2021
    homersdog

    homersdog Tulsa, Ok 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Tulsa, OK
    Joined:
    Jan 8, 2012
    Messages:
    2,355
    That's a neat looking bundle. Are you going to label things? Might help trouble shooting in the future, and you know where everything is now.
     
    tripilio likes this.
  4. Aug 14, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    The wires have printed out on them names. Not necessarily what I have used them for but they are traceable. I might put labels with numbers on them to make them easier to follow. But on the other hand, there are only a few circuits. This harness is a 12 circuit module I bought at 30 something dollars instead of a painless at several hundreds. So far I think I have enough for what I need.
     
    givemethewillys likes this.
  5. Aug 16, 2021
    SoFla8300

    SoFla8300 Member

    South Florida
    Joined:
    Jun 9, 2020
    Messages:
    64
    Nothing a beer can't fix!
     
    tripilio likes this.
  6. Aug 17, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    An "almost finished" harness. The yellow wire dangling is for the fuel pump. I will later wrap around the bundle a plastic coil that makes it look more neat.
    IMG_20210817_195509_copy_1248x1664.jpg
     
    Last edited: Aug 18, 2021
    truckee4x4, Desert Runner and ITLKSEZ like this.
  7. Aug 17, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    This schematic turns the brake light into a "turn" signal...pun intended!:lol: That way I do not have to run an extra wire and change the tail lights. Mine (not the originals by far) have only position, brake and plate on one.
    Screenshot_20210810-201948.jpg
     
  8. Aug 21, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    After some initial trouble I got the engine to start! I am really happy! It sounds great! I need to check the timing and adjst the carburetor but that is all.
    :bananatool:
     
    OzFin, homersdog and ITLKSEZ like this.
  9. Aug 21, 2021
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    The engine starting is a major milestone. Congratulations
    -Donny
     
    truckee4x4 and tripilio like this.
  10. Aug 21, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Thanks Donny!
     
  11. Aug 24, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    My solution to the brake light. I have seen here a few failures on the brake fluid switch and decided to go mechanical. The bracket will go under the floor aligned with the pedal and hooked by the spring wire. Hope it works!
    IMG_20210824_165109_copy_2080x1560.jpg
     
  12. Sep 21, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Moving (slooowly) forward with the electrical work.

    IMG-20210921-WA0009_copy_864x1536.jpeg IMG-20210921-WA0007_copy_1536x864.jpeg IMG-20210921-WA0003_copy_864x1536.jpeg
     
    Fireball, ITLKSEZ and Jw60 like this.
  13. Sep 21, 2021
    Jw60

    Jw60 Sitting up n buckled down. 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sedalia MO.
    Joined:
    Apr 8, 2008
    Messages:
    4,716
    Who what where did you find this switch and is it water friendly?

    Your moving right along on the jeep
     
    tripilio likes this.
  14. Sep 21, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Thanks! Is is a cheapo from ebay. It is designed for motorcycles and I guess It could/will resist the elements. I guess I can shield it a bit...(y)
     
  15. Sep 26, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    A very frustrating feeling, having everything in place to see a few things not working! My alternator lights is acting up and now my temp gauge stays on cold even after warming up the engine.
    IMG_20210926_143707_copy_1664x1248.jpg
     
    ITLKSEZ likes this.
  16. Sep 26, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    I tested and I have 12 v at the gauge but no 5 v at the bridge. I made sure it was properly grounded when I installed it but I guess is cluster out and redo it again.
     
  17. Sep 27, 2021
    truckee4x4

    truckee4x4 Grant Kaye 2023 Sponsor 2022 Sponsor

    Truckee CA
    Joined:
    May 30, 2008
    Messages:
    1,322
    Man this is looking nice! Bummer about the temp gauge - hope it's an easy fix. I am going to print out that pic above of your firewall and tape it up in my garage for inspiration!
     
    tripilio likes this.
  18. Sep 27, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Thanks! I already ordered a step-down 12v to 5 v dc to remove the risk of the internal voltage regulator ruining (if not already) my gauges. I hope that is all!
     
  19. Oct 9, 2021
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    My birthday cake! My wife has a sense of humor. Her accuracy might not be the best but the intention is what counts!
    IMG_20211009_201937_copy_1248x1664.jpg
     
  20. Oct 9, 2021
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    Very nice. HBD to you.
     
    tripilio likes this.
New Posts