1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

The Official "What The Heck Is This?" Thread

Discussion in 'Early CJ5 and CJ6 Tech' started by Focker, Feb 19, 2016.

  1. Sep 24, 2019
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    Hood bumper 5761372
    [​IMG]

    About 3/4" diam across the face.
     
    Lockman likes this.
  2. Sep 24, 2019
    Lee Bennett

    Lee Bennett Banned

    Joined:
    Jan 2, 2019
    Messages:
    291
    My bag has a thick linear area on the back side for abrasion. I also have its mount from that fender. These bumpers were not located at that area. Very close to same area though.
     
  3. Sep 24, 2019
    hunter blacksmith

    hunter blacksmith Sleepin’ Jeeper

    Valley springs,ca
    Joined:
    May 23, 2019
    Messages:
    59
    Floorboard plugs? I think my Jeep has some.
     
  4. Sep 24, 2019
    homersdog

    homersdog Tulsa, Ok 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Tulsa, OK
    Joined:
    Jan 8, 2012
    Messages:
    2,355
    My 71 doesn't have anything like that. Welting on the grill, the wash reservoir was originally a polyethylene bag. Those are not stock I'm thinking.
     
  5. Oct 5, 2019
    KeithR

    KeithR Member 2022 Sponsor

    Canada
    Joined:
    Oct 2, 2018
    Messages:
    70
    What's this set lever supposed to do? I pull it but the seat doesn't move forward/backward or up/down

     
  6. Oct 5, 2019
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    Look under the seat to see what it's connected to. If it's part of the track system it could be stuck.
     
  7. Oct 5, 2019
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    What the heck it is supposed to be is an alternator bracket. How the heck it goes together is the question. Buick 231.

    [​IMG]


    [​IMG]
     
  8. Oct 5, 2019
    Oldriginal86

    Oldriginal86 Member

    Pasadena, Md.
    Joined:
    Nov 5, 2014
    Messages:
    589
    Looks more like a power steering pump bracket to me.
     
  9. Oct 5, 2019
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    well that would be awesome but I’m still not seeing how it goes together.
     
  10. Oct 5, 2019
    Dave B

    Dave B Frankenjeep '67

    Northern Minnesota
    Joined:
    Nov 10, 2009
    Messages:
    650
    Must belong to this :confused:

    [​IMG]
     
    Buildflycrash likes this.
  11. Oct 5, 2019
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    Well I tried again with a spare pump I have and I couldn’t get anything to line up.

    [​IMG]

    but the large part does bolt up to the alternator side just right.

    [​IMG]
     
  12. Oct 6, 2019
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
  13. Oct 6, 2019
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    I know, but the bolt holes only line up like this. NAPA is open tomorrow so I’ll go ahead and buy an Alternator. I’ll have to drive into town for some long *** bolts to.
     
  14. Oct 6, 2019
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,407
    looks like a bracket for AC compressor and alternator
    from a 80's oldsmobile
     
    Focker likes this.
  15. Oct 6, 2019
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    got any photos?
     
  16. Oct 11, 2019
    johnny_boy02

    johnny_boy02 New Member

    Yuba City, CA
    Joined:
    Oct 11, 2019
    Messages:
    11
    Hello, I am coming from Toyotas and almost completely new to early jeeps.. I recently bought a nice and fairly built Jeep. There is a knob on the dash just above the emergency flashers that pulls out but doesnt seem to do anything. So 2 questions. 1) Is it stock 2) if so what is it supposed to do?

    [​IMG]

    Here's the new to me Jeep.

    [​IMG]
     
  17. Oct 11, 2019
    Buildflycrash

    Buildflycrash More or Less in Line. 2024 Sponsor 2022 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    3,559
    Ejection Seat of course.
     
  18. Oct 11, 2019
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,754
    Activates the oscillation overthruster.
     
    tripilio and johnny_boy02 like this.
  19. Oct 11, 2019
    Dave B

    Dave B Frankenjeep '67

    Northern Minnesota
    Joined:
    Nov 10, 2009
    Messages:
    650
    1) No stock ivory/white switches in that location. 2) May have to trace the wires to see if they really go to the ejection seat, or oscillation overthruster. :susp:
     
    Monty, tripilio, johnny_boy02 and 2 others like this.
  20. Oct 11, 2019
    johnny_boy02

    johnny_boy02 New Member

    Yuba City, CA
    Joined:
    Oct 11, 2019
    Messages:
    11
    Thanks. This is mainly what I was looking to find out before I started digging.
     
New Posts