1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

304 Engine Swap

Discussion in 'Early CJ5 and CJ6 Tech' started by tripilio, Apr 15, 2019.

Tags:
  1. Apr 15, 2019
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    How hard would it be to adapt a 308(304, my bad!) to my t90 that I currently have attached to a f134? Depending on the amount of work involved I would sell it instead of mounting it. Thanks.
     
    Last edited: Apr 15, 2019
  2. Apr 15, 2019
    TIm E

    TIm E Aggressively average

    NW Arkansas
    Joined:
    Mar 2, 2017
    Messages:
    683
    308...I suddenly want to shoot something at long range! :D

    AMC 304 maybe?
     
    tripilio likes this.
  3. Apr 15, 2019
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    Maybe I was thinking about eliminating someone! Take 4 out then!
     
  4. Apr 15, 2019
    Renegade ll

    Renegade ll Member

    Thayne Wyoming
    Joined:
    Feb 17, 2013
    Messages:
    772
    I would put a V6 225 in before the 304 V8.
     
  5. Apr 15, 2019
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    The thing is I just got a cj5 donor car that has one. Either that one works or I'll keep the 134 and sell the 304.
     
  6. Apr 15, 2019
    rusty

    rusty Well-Known Member

    norfolk,va
    Joined:
    Dec 16, 2006
    Messages:
    1,652
    Bigger is always better. Sometimes.
     
    tripilio likes this.
  7. Apr 15, 2019
    Chilly

    Chilly Active Member

    Joined:
    Mar 12, 2007
    Messages:
    1,486
    Is the donor car an auto tranny? Most of the time I'm 100% certain it'll need a flywheel if converting to a manual, and for sure those are expensive, I think.

    I'm not a big fan of conversions. The adaptors are always expensive, and thats half of the expense and trouble you end up dealing with. So many threads on making clutches function, fabbing cross members, rerouting exhausts, interference with steering and linkages... sometimes its just OK to run it the way Toledo made it. My opinion, which has evolved.
     
    Keys5a, mike starck and tripilio like this.
  8. Apr 15, 2019
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    It is a manual 3 speed (don't have the specs at hand right now). I will be most likely, selling the complete power train, altogether or in pieces. For now, I will stick to my four banger.
     
    mike starck likes this.
  9. Apr 15, 2019
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    What's the year of the donor? I would use a T-15 3-speed, not the T-90. The T-15 will connect to a big hole Dana 18 as I recall, and will bolt up to the 304. '72-75 CJs with the 304 got the T-15, as did the Commandos. A T-15 is up to V8 power, and there's no easy way to adapt a 304 to a T-90. A Chevy yes, AMC no.

    There's enough room for a V8. Lots of Chevys have gone in to these Jeeps. A V6 is easier, but a V8 will fit. The AMC V8s aren't particularly big, about like a Chevy or Ford small block, as I recall.

    '76-79 CJs got a Tremec T-150, which is a different story.
     
  10. Apr 15, 2019
    FinoCJ

    FinoCJ 1970 CJ5 Staff Member

    Bozeman, MT
    Joined:
    Jul 18, 2013
    Messages:
    5,593
    If you are seriously considering this swap, I'd swap the T15 along with the 304 - keep them together. Then you would need the large D18 to go with the offset rear axle. Or I would even consider swapping the D20 and the centered rear axle as well (assuming its a D44 and not a AMC20) with the 304 and T15 - keep it all together. I wouldn't be up for the work myself, but I think it would be cool to drive.
     
    ITLKSEZ likes this.
  11. Apr 15, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    I don't see why this would be too diff than a SBF(ord).

    Prolly have all the usual stuff regardless of direction: Radiator change, prolly best to swap the grill as well. Mounts. Maybe adjustable pivot and throw-out, for clutch stuff. Exhaust work.

    I looked into this one, talked to a guy with a 360 in a 3B, but have not done one. Seems like a 3spd swap on paper is:

    T90: T90 to Small Block Ford. AMC bell.
    T15: T15 to big hole Spicer18 (this is the route I'd go)
    T15: Use the D20. Centered D44 from 72-75 swap

    I know Novak doesn't 'like' the AMC V8s but they also hate the AW4 (and love the 700R4), so IMO they aren't always right. lol
     
    tripilio likes this.
  12. Apr 15, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    My $.02: If the early CJ5 is an original survivor, leave it alone. If it's a mutt or not very restoreable, do whatever will yield the most usable rig.
     
    tripilio likes this.
  13. Apr 15, 2019
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    The Ford adapter and T-150 bell should work. Ford-to-T90 adapters are not plentiful on the used market, it seems. If the donor is a '76 or newer, that might be the best route.
     
  14. Apr 15, 2019
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    Consider using the whole donor drivetrain; 304/T15/D20, and the axles too. The front axle should be a Dana 30, maybe even with disc brakes. Since you have all these pieces from the donor, they already are designer to work together. Driveshaft lengths would need to be modified, but not too much else. The donor would also have swinging pedals, so even the clutch linkage could be swapped.
    -Donny
     
    dozerjim and tripilio like this.
  15. Apr 15, 2019
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    What would need to be changed to keep my current drivetrain but add the dana 30?
     
  16. Apr 15, 2019
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    7,110
    I have a Ford T90 adapter if you go that route.
     
  17. Apr 15, 2019
    Keys5a

    Keys5a Sponsor

    Florida Keys
    Joined:
    Jan 23, 2014
    Messages:
    4,170
    Match the gear ratio to match the rear. I've never seen a D30 steered by the original bellcrank setup, but it likely would be fairly easy to adapt. Usually, a Saginaw conversion goes along with a D30 axle swap.
    Alex, I may be interested in some pieces of your "new" donor vehicle, once you figure out what you need.
    -Donny
     
  18. Apr 15, 2019
    tripilio

    tripilio Proud American!

    Miami
    Joined:
    Aug 12, 2018
    Messages:
    930
    PM sent
     
  19. Apr 15, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    D30 should have a two hole passenger knuckle, so rigging up the bellcrank should only involve a custom drag link.
     
New Posts