1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Roxor - Swing Pedal Assembly

Discussion in 'Roxor Tech' started by Jrobz23, Aug 31, 2018.

  1. Sep 26, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    Parts are cheap as S**** and all seem high quality. The brake master cylinder seems a bit cheaper than others but it's a Girling and they are known for quality parts. No testing done yet though so we'll see.
     
    Daryl likes this.
  2. Sep 26, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    Brake booster and Master Cylinder Update.
    Everything set in smoothly, my only gripe is that the brake booster and pedal assembly did not come with a pivot pin. Luckily I had one lying around that fit. If you're doing this in steps, be sure to make holes in the firewall that fit the 4 master cylinder/brake booster studs (there are 6 of them) and do not drill the two round holes out. They are not needed.

    One of the unneeded holes is seen here. There is another one on the other side of the plunger.
     
  3. Sep 26, 2018
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    Lookin good! Did the dealer have a part# for the firewall side backer plate?
     
  4. Sep 27, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    Nope. Cant find one on the roxor parts pages either. Honestly though the backer plate on the cab side and dash mounts make everything stiff enough I'm planning on not running an engine side firewall plate for a while.
     
  5. Sep 30, 2018
    RVSwisher

    RVSwisher Member

    Rochester, MN
    Joined:
    Jul 11, 2006
    Messages:
    129
    Does anyone have the part number for the brake booster?
     
  6. Sep 30, 2018
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,102
    The parts manual is online-

    ROXOR Offroad
     
  7. Oct 3, 2018
    DrDanteIII

    DrDanteIII Master Procrastinator

    Milford NJ 08848
    Joined:
    Mar 21, 2007
    Messages:
    1,516
    Those parts are surprisingly cheap. I might have to do this.
     
    jeepstar likes this.
  8. Oct 4, 2018
    sterlclan

    sterlclan Member 2022 Sponsor

    exploring the...
    Joined:
    Feb 21, 2009
    Messages:
    3,869
    i couldnt find the dont do anything stupid dash sticker though...
     
  9. Oct 4, 2018
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,102
    Found the Ox Locker- $1800. o_O
     
  10. Oct 4, 2018
    zinertia2

    zinertia2 "and which part are you keeping?" 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Greencastle , IN
    Joined:
    Feb 15, 2018
    Messages:
    184
    Asked for more parts from dealer and have now been told “the prices are wrong on the site”
    Pedal set was exactly as on web
    Brake light switch $10.99 to $17.99
    Waiting on my other inquiries
     
  11. Nov 15, 2018
    Velociraptor_Implant

    Velociraptor_Implant New Member

    Dallas
    Joined:
    Jun 5, 2018
    Messages:
    9
    Has anyone determined what the MC line fitting size is?
     
  12. Nov 15, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
  13. Nov 16, 2018
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,754
    I wonder how much work this would be with a 134 engine? I have the 134/T98 transmission. wouldn't it be weird to have the clutch and brake pedals on different pivots?

    I'm working on a dana 30 now to replace my dana 27. the dana 30 has disks, so Ill need to get a booster, or a dual reservoir at the bare minimum.
     
    Steve's 70-5 likes this.
  14. Nov 16, 2018
    ITLKSEZ

    ITLKSEZ Hope for the best, prepare for the worst

    Liberty Lake, WA
    Joined:
    Aug 13, 2015
    Messages:
    6,656
    It only looks weird. Doesn't feel weird. My 3B has stock clutch and swinging brake.
     
    jeepstar likes this.
  15. Nov 16, 2018
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    I thought someone on here did a hydraulic internal slave on a 134, no?
     
  16. Nov 17, 2018
    Velociraptor_Implant

    Velociraptor_Implant New Member

    Dallas
    Joined:
    Jun 5, 2018
    Messages:
    9
    Just ordered mine, we will see how it fits a 3b. I think I will have to mount it higher and not be able to use the steering column as a brace. I also only have ~12" between dash and firewall so i will have to cut some off and bend some new ears if I want to have the dash brace. Still easier than fitting an XJ pedal set (if i want a dash brace). I also think the brake MC is going to work great with the Tracker brake calipers.
     
  17. Jan 3, 2019
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    You get your kit set into the 3B?
     
  18. Feb 25, 2019
    Velociraptor_Implant

    Velociraptor_Implant New Member

    Dallas
    Joined:
    Jun 5, 2018
    Messages:
    9
    I haven't even unboxed it yet, distracted with getting an SM465 in there, hunting season, and a 7mo baby.
     
  19. Mar 17, 2019
    masscj2a

    masscj2a Member 2023 Sponsor

    Ware, Mass
    Joined:
    Dec 27, 2013
    Messages:
    743
    Just found this. This stuff looks good and makes the choice to run this stuff easy. A lot less hunting in the bone yard and more time spent on installing. Thanks guys.
     
  20. Dec 4, 2019
    Steve's 70-5

    Steve's 70-5 Active Member

    Louisville, Ky
    Joined:
    Nov 12, 2009
    Messages:
    1,381
    Looking at doing this conversion. I have disk brakes on the rear of my Jeep. Does anyone know if the rear side of the master cylinder have the 10lb valve that can be removed?
     
New Posts