1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Roxor - Swing Pedal Assembly

Discussion in 'Roxor Tech' started by Jrobz23, Aug 31, 2018.

  1. Sep 18, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    The clutch master is wilwood. Fits perfectly so far. I haven't decided on a roxor brake master with booster or just going with the master I currently have, which I probably will do at first. If I'm not happy with that, I'll probably go with the roxor cylinder and booster.

    The roxor brake master brake booster is I believe 7" in diameter and thinner than I've seen any others. Looks to be about 2-3" thick. Roxors have drum rears and disc fronts so the cylinder is matched to that. Should provide enough clearance. I have a v8 and looks like it would fit fine.
     
  2. Sep 18, 2018
    zinertia2

    zinertia2 "and which part are you keeping?" 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Greencastle , IN
    Joined:
    Feb 15, 2018
    Messages:
    184
    7161D655-9814-41C8-BBF7-A0BB682025FB.jpeg D96FD8D1-B2B8-4B28-887D-19DCDD337F4F.jpeg

    Browncoat provided these from an intermediate stock set of pedal measurements

    6” from floor sounded high as well until I remembered this reference

    There are a series of aftermarket 7” dual diaphram brake boosters which bolt to GM style master cylinders. Using these in my build, will adapt the pedals ( though it looks like it might be a minor mod)
     
    Last edited: Sep 19, 2018
    Danefraz likes this.
  3. Sep 19, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    The pedals right now actually sit 5.5" from bottom of the floor to bottom of the pedal like pictures above. The "swing" I guess is about 6" right now. If you step on the pedal, it moves about 6" before hitting the angled portion of the floor if that makes sense.
     
  4. Sep 19, 2018
    Muzikp

    Muzikp Active Member

    Sacramento Ca.
    Joined:
    Sep 27, 2016
    Messages:
    1,450
    That is amazing!!! It took me a long time to get my swinging brake pedal installed and here you are about done in one evening :clap::clap::clap::bananatool::bananatool::bananatool:
     
    Danefraz and Focker like this.
  5. Sep 19, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    @Jrobz23 If it isn't too much trouble, could you please shoot a picture of behind the dash? I'm wondering how the manufacturer attached the pedal cluster to the dash.
     
  6. Sep 20, 2018
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    They just bolt right through the dash. I uploaded a couple more pics. The dash pic and the Roxor all dressed up like a CJ.

    Roxor Pics 2
     
  7. Sep 20, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    Well that's easy enough; thanks @Jrobz23 . I may end up just doing this. Thinking about options for a clean flat looking dash but I hate welding bolts to thin metal...
     
  8. Sep 20, 2018
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    I hear ya on the clean dash. I like that look too. I do think I will eventually get a Roxor steering column for '57. I like it a ton more than the Summit unit I got, and it looks more the part.
     
  9. Sep 20, 2018
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,754
    pics!!!
     
  10. Sep 21, 2018
    zinertia2

    zinertia2 "and which part are you keeping?" 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Greencastle , IN
    Joined:
    Feb 15, 2018
    Messages:
    184
    289C5F76-A4B7-4F45-858F-57F0D99F34BF.jpeg FE0865D8-DDDD-4205-B8DC-46940BF7C0FC.jpeg



    Pictures with a 7” dual diaphragm booster. Holes almost but not! Good news is that it fits and plenty of room for clutch master!
     
    Danefraz and Jrobz23 like this.
  11. Sep 25, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    I went ahead and drilled holes in the dash for the pedal cluster's front mounts. While I'd still prefer to have the bolts hidden, it really does not look bad and the steering column hides the holes decently well. I will say by doing this, the pedals REALLY sturdied up; so much so that I'm not going to put a plate on the firewall.
     
    Jrobz23 likes this.
  12. Sep 25, 2018
    jeepstar

    jeepstar Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Sheboygan
    Joined:
    Jun 28, 2006
    Messages:
    2,754
    pictures of the fully installed and bolted up unit?
     
  13. Sep 25, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    Here you go:
     
  14. Sep 25, 2018
    RVSwisher

    RVSwisher Member

    Rochester, MN
    Joined:
    Jul 11, 2006
    Messages:
    129
    Is that a Roxor steering column? I have the swinging pedals on order for my CJ3B project.

    RVS
     
  15. Sep 25, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    It's a summit racing steering column. The roxor columns look to be about the same width as stock columns but that's about all I know about them
     
  16. Sep 26, 2018
    justin_bongo

    justin_bongo Member

    Pampa, TX
    Joined:
    Oct 8, 2014
    Messages:
    94
    What length column did you end up getting from Summit?
     
  17. Sep 26, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    justin_bongo likes this.
  18. Sep 26, 2018
    Dgroshek

    Dgroshek Member

    TX
    Joined:
    Dec 11, 2017
    Messages:
    194
    Brake master cylinder and booster (stock Roxor) came in today. I'll probably get this mounted tonight and update with pictures. While I was at the dealership, I questioned Roxor's tortion bars. They are straight lengths of rod, no bends like the originals but at $1.98 per bar, I ordered 2. Those should be in next week.
     
    Jrobz23 and jeepstar like this.
  19. Sep 26, 2018
    justin_bongo

    justin_bongo Member

    Pampa, TX
    Joined:
    Oct 8, 2014
    Messages:
    94
  20. Sep 26, 2018
    Jrobz23

    Jrobz23 Member

    Northern, WI
    Joined:
    Oct 3, 2016
    Messages:
    942
    So far the parts prices seem very reasonable.
     
New Posts