1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

My New To Me South Bend

Discussion in 'The Tool Shed' started by Focker, Oct 30, 2017.

  1. Nov 12, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    I have no idea what any of that means? :oops:
     
  2. Nov 12, 2017
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,102
  3. Nov 12, 2017
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,798
    hahahaahaahah.

    Yeah, you will have to compensate for the wear. I do alright with my wore out junk.
     
  4. Nov 12, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    Getting schooled.

     
  5. Nov 12, 2017
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    These are a great set of videos! I saved these to my computer about 10-12 years ago before they were on YouTube.
     
  6. Nov 12, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    Do you know of a forum that would be worth joining?

    practicalmachinist.com seems to be popular, but I hate all the ads! :mad:
     
    cookieman likes this.
  7. Nov 12, 2017
    Admiral Cray

    Admiral Cray I want to do this again.. Staff Member

    Bainbridge...
    Joined:
    Sep 21, 2009
    Messages:
    204,347
    All most looks like mine, and mine was free too...

    [​IMG]

    You SCORED... (y)
     
    Focker likes this.
  8. Nov 12, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    [​IMG]

    [​IMG]

    I'm going to move it here as soon as I finish cleaning it. The drawers will house the tooling.
    [​IMG]
     
  9. Nov 12, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    I think I'll keep the galvanized sheet and cut the back off to fit my base.
    [​IMG]
     
  10. Nov 12, 2017
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,102
  11. Nov 12, 2017
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Here is what my 1943 South Bend looks like, it is a 3' bed length "B" model converted to an "A" model.
    Lathe-1-1.jpg

    IMG_0164.JPG

    The last picture is with the larger dial on the compound that I made, the quick change reversing lever on the side of the headstock and my collet holder added. I had a friend of mine that owns a fab shop make the chip pan for me, the carriage stop I designed and made, I also have the serpentine belt instead of the flat leather, much more turning power.

    You will need to get some Mobil Velocite #10 spindle oil for the lathe, can be had from MSC and I think from Traverse tool. Make sure the wicks in your spindle are in good shape, these machine have No bearings in the spindle, only a thrust bearing in the back of these machines, they run a hard spindle on a cast iron bearing (machined in head) or segmented cast iron head. They have to have oil to survive!!
     
    Last edited: Nov 15, 2017
  12. Nov 12, 2017
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Here is a picture of the Headstock bearing surface, this is the segmented one, you can see the oil wick in the hole.
    South bend headstock serrated.jpg

    If you go to this page:South Bend Lathe Parts Lists

    There are exploded views with part numbers and descriptions to help you take your machine a part and put it together. It also shows variations in the parts and different models.

    Your machine is a 9" C model.
     
    Last edited: Nov 15, 2017
    Focker likes this.
  13. Nov 12, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    That's the main reason my coworker didn't use it. He wanted the correct oil, but didn't try too hard to find it until about a year ago. He misplaced the oil and decided to pass the lathe along to the next guy... Lucky me!
     
  14. Nov 13, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    Cleaned, leveled and anchored.
    [​IMG]
     
    47v6 likes this.
  15. Nov 14, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    Mike, thanks for explaining the Compound Rest components last night. Today I broke it down, cleaned and reassembled it and now there's no play in the Compound Rest Knob or Cross Feed Knob. (y)
     
    47v6 likes this.
  16. Nov 14, 2017
    PieLut

    PieLut Member

    Glendale, Arizona
    Joined:
    Jul 20, 2010
    Messages:
    464
    Focker likes this.
  17. Nov 15, 2017
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    9,754
    Ready for the logical next step, Focker?:D

    12227001_10205161905587705_2083853813679288714_n1447120902.jpg
     
    dozerjim, 47v6, ITLKSEZ and 4 others like this.
  18. Nov 15, 2017
    wheelie

    wheelie beeg dummy 2024 Sponsor 2023 Sponsor

    York, PA
    Joined:
    Mar 6, 2004
    Messages:
    4,491
    Jealous Focker. Chris gave me a little lathe a couple years ago and I haven't set it up YET! Planning on moving and trying not to get too tied into this place. Keep at it. I'm watching, along with the others.

    Side note.......on that picture above.....love the palm tree insignia. What did it mean?
     
    Focker likes this.
  19. Nov 15, 2017
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,102
  20. Nov 15, 2017
    Focker

    Focker That's a terrible idea...What time? Staff Member

    WA
    Joined:
    Aug 18, 2014
    Messages:
    7,540
    I've always loved that pic. That's bada$$!
     
New Posts